ShrinkRC Body Mounts for RC4WD Mojave II Four Door

Body mount system for RC4WD Mojave II Four Door

*All Vanquish or Axial SCX10ii builds: Use Traxxas long rod ends (p/n TRA5525) on one end of upper and lower rear links (trim about 5mm from the Traxxas rod ends).

"Vanquish VS410" Works with Fordyce, Phoenix, Pro, Ultra, and Builder's Kit. Front wheels will sit forward about 5mm if running portals. 

"Vanquish VRD" Works with Carbon, Stance and Builder's Kit. The body mounts for the VRD are designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. Front wheels will sit forward an extra 5mm if running portals.  

"Axial SCX10ii" (Not compatible with SCX10iii)

"Axial SCX10 Pro" (Not compatible with SCX10iii) The body mounts for the Pro are designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. 

"Element Enduro Sendero, Trailrunner" Use 12.3" rear links from Element rear link set (p/n ASC42044) with Traxxas long rod ends (p/n TRA5525) on one end of all four rear links (trim the rod ends as needed). Not recommended for Enduro SE, Utron, or Stealth XF Transmission if using an interior. Not compatible with Comp Fox Competition Rock Crawler kit.

"RC4WD TF2 LWB" Direct fit.

"Redcat Ascent & Fusion" Use RC4WD long rod ends (p/n RC4ZS0403) on one end of upper and lower rear links. Replace rear drive shaft tubes and splined center slider with Axial WB8-HD (p/n AX31586).

"Redcat Gen8" Direct fit. Adjust the position of all four rear links.

"Traxxas TRX-4" Starting with a 12.3" wheelbase, use Traxxas long rod ends (p/n TRA5525) on one end of upper and lower rear links (trim about 5mm from the Traxxas rod ends).

Please read:

4.19 Tires recommended and/or be prepared to cut the body. Interiors will require cutting to clear the transmission. It is typically necessary to relocate the factory ESC, receiver, and battery tray. Holes must be made in the bed to clear the rear shock towers, or switch to shorter towers, or cantilevers. Stainless steel hardware included. Body not included. Made in USA.

Photo: @marcsgarage

Shop Mojave II Four Door bodies here: RC4WD Mojave II 4 Door

Shop for 4x4 crawler chassis here: Amain Hobbies

This product is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and TRX-4® are trademarks or registered trademarks of Traxxas, L.P.