ShrinkRC Body Mounts for RC4WD Mojave II Two Door
ShrinkRC Body Mounts for RC4WD Mojave II Two Door
Body mount system for RC4WD Mojave II 2 Door
Vanquish VS410 Fordyce & Phoenix Straight Axle *VFD Twin Selectable Overdrive must be locked in one position, there is no space for a servo. Also works with VS410 Pro. Use rod ends (AX31186), upper links (AX31421), lower links (AX31419), and set screws (AX31343) to get a 11.4" wheelbase. Can also be used with portals but the front wheels will sit forward about 5mm due to the built in caster.
Vanquish VRD Carbon & Stance Note: the body mounts for the VRD Carbon & Stance are purposely designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. The front axle is not centered in the wheelwell. Recommended for "truggy" style or "cab only" builds. The Carbon wheelbase is 12.67" and will NOT work with a stock Mojave Two Door bed.
Axial SCX10ii Use rod ends (AX31186), upper links (AX31421), lower links (AX31419), and set screws (AX31343) to get a 11.4" wheelbase.
Axial SCX10 Pro Note: the body mounts for the Pro are purposely designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. The front axle is not centered in the wheelwell. Recommended for "truggy" style or "cab only" builds. The Pro wheelbase is 12.5" and will NOT work with a stock Mojave Two Door bed.
Element Enduro/Sendero/Trailrunner Use 11.8" rear links from Element rear link set (p/n ASC42044) with Traxxas short rod ends (p/n TRA5347) to get a 11.4" wheelbase. (Not recommended for Enduro SE, Utron, or Stealth XF Transmission if using an interior.)
RC4WD TF2 Direct fit.
Redcat Ascent & Fusion Requires custom rear links. For a video on how to make custom links check out this video: How to Make Custom Links
Rock Pirates Interceptor Recommended for "truggy" style or "cab only" builds. The Interceptor wheelbase is 12.3" and will NOT work with a stock Mojave Two Door bed. Works with Axial SCX10ii skid plates and suspension links. Also works with Vader SCX10/Enduro skid plate for 3 gear transmission. Also works with Vanquish original VFD transmission and skid, but NOT compatible with VFD Twin.
SSD RC Trail King Pro Use rod ends (AX31186), upper links (AX31421), lower links (AX31419), and set screws (AX31343) to get a 11.4" wheelbase.
Traxxas TRX4 Requires custom rear links. For a video on how to make custom links check out this video: How to Make Custom Links
Please read:
4.19 Tires recommended and/or be prepared to cut the body.
Interiors will require cutting to clear the transmission. It is typically necessary to relocate the factory ESC, receiver, and battery tray.
Shop for 4x4 crawler chassis here: Amain Hobbies