ShrinkRC Body Mounts for RC4WD 1982 Toyota Pickup

Body mount system for RC4WD 1982 Toyota Pickup & Mojave II 2 Door Hard Body

*All Vanquish or Axial SCX10ii builds: Use Vanquish 94mm rear upper links (VPS30940) and Vanquish 102mm rear lower links (VPS31020) with Incision rod ends (IRC00010) to shorten the wheelbase.

"Vanquish VS410" Works with Fordyce, Phoenix, Pro, Ultra, and Builder's Kit. Front wheels will sit forward about 5mm if running portals. VFD Twin Selectable Overdrive must be locked in one position, there is no space for a servo. 

"Vanquish VRD" Works with Carbon, Stance and Builder's Kit. The body mounts for the VRD are designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. Front wheels will sit forward an extra 5mm if running portals. Also works with Mullet, but the bed mount will sit forward of the normal position due to the shorter frame rails. 

"Axial SCX10ii" (Not compatible with SCX10iii)

"Axial SCX10 Pro" (Not compatible with SCX10iii) The body mounts for the Pro are designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. Recommended for "truggy" style or "cab only" builds. The Pro wheelbase is 12.5" and will NOT work with a stock Mojave Two Door bed.

"Element Enduro/Sendero/Trailrunner" Use 11.8" rear links from Element rear link set (p/n ASC42044) with Traxxas short rod ends (p/n TRA5347) to shorten the wheelbase. Not recommended for Enduro SE, Utron, or Stealth XF Transmission if using an interior. Not compatible with Comp Fox Competition Rock Crawler kit.

"RC4WD TF2" Direct fit.

"Redcat Ascent & Fusion" or "Traxxas TRX4" Requires custom rear links. For a video on how to make custom links check out this video: How to Make Custom Links 

This product is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and TRX-4® are trademarks or registered trademarks of Traxxas, L.P.