ShrinkRC
ShrinkRC Body Mounts for RC4WD 1985 Toyota Pickup
ShrinkRC Body Mounts for RC4WD 1985 Toyota Pickup
Couldn't load pickup availability
Body mount system for RC4WD 1985 Toyota Pickup
*All Vanquish or Axial SCX10ii builds: Use Vanquish 94mm rear upper links (VPS30940) and Vanquish 102mm rear lower links (VPS31020) with Incision rod ends (IRC00010) to shorten the wheelbase.
"Vanquish VS410" Works with Fordyce, Phoenix, Pro, Ultra, and Builder's Kit. Front wheels will sit forward about 5mm if running portals.
"Vanquish VRD" Works with Carbon, Stance, Mullet, and Builder's Kit. The body mounts for the VRD are designed to push the front wheels forward several millimeters, to allow the use of larger tires with trimmed fender wells. Front wheels will sit forward an extra 5mm if running portals.
"Axial SCX10ii" (Not compatible with SCX10iii)
"Element Enduro/Sendero/Trailrunner" Use 11.8" rear links from Element rear link set (p/n ASC42044) with Traxxas short rod ends (p/n TRA5347) to shorten the wheelbase. Not recommended for Enduro SE, Utron, or Stealth XF Transmission if using an interior. Not compatible with Comp Fox Competition Rock Crawler kit.
"RC4WD TF2" Direct fit.
"Redcat Ascent & Fusion" Requires custom rear links. For a video on how to make custom links check out this video: How to Make Custom Links
Please read:
3.9 Tires recommended and/or be prepared to cut the body. Interiors will require cutting to clear the transmission. It is typically necessary to relocate the factory ESC, receiver, and battery tray. Holes must be made in the bed to clear the rear shock towers, or switch to shorter towers, or cantilevers. Stainless steel hardware included. Body not included. Made in USA.
Shop for 4x4 crawler chassis here: Amain Hobbies
